Festool PSBC 400 EB CARVEX User Manual download pdf (Page 16)

CARVEX

5 Safety instructions

5.1 General safety instructions

WARNING! Read all safety warnings

and all instructions.

Failure to follow

the warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for fu-

ture reference.

The term "power tool" in the warnings refers to

your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

5.2 Machine-related safety instruc-

tions

–

Hold power tool by insulated gripping

surface, when performing an operation

where the cutting accessory may con-

tact hidden wiring.

Cutting accessory con-

tacting "live" wire may make exposed metal

parts of the power tool "live" and could give

the operator an electric shock.

–

The charger and power tool are not in-

tended for use by persons (including

children) with limited physical, sensory

or mental ability or without sufficient

experience and/or knowledge, unless

they are supervised by a person respon-

sible for their safety or have been in-

structed on how the charger or power

tool is to be used.

Children should always be

supervised to ensure that they do not play

with the charger or the power tools.

–

Festool electric power tools must only be

installed on work tables provided by Fes-

tool for this purpose.

If the tool is installed in

another, or self-made, work table, it can be-

come unstable and result in serious accidents.

–

Wait until the power tool stops com-

pletely until placing it down.

The tool can

become entangled and lead to a loss of con-

trol of the power tool.

– Do not open the battery pack or the charger. Even

after disconnection from the mains, there is still a

high capacitor voltage inside the charger.

– Make sure that metal objects (such as metal

chips) or fluids do not collect in the battery pack

retaining slots or enter the machine through the

air vent slits (danger of short circuit).

– Do not charge battery packs from external

manufacturers. The charger is designed for

charging original battery packs only. Never

charge the battery packs in chargers from

external manufacturers. Otherwise there is a

danger of fire and explosion.

– Protect the battery pack from excessive heat

or constant heat sources such as sunlight or

naked flames. There is a risk of explosion.

– Never use water to extinguish burning LiIon

battery packs, always use sand or a fire blanket.

– Deformed or cracked saw blades and saw

blades with blunt or broken cutting edges

must not be used.

– Always place the pendulum jigsaw on the

workpiece with the saw blade running.

– Wear suitable protection such as ear pro-

tection, safety goggles, a dust mask for

Charger TRC 3

Mains voltage (input) 220 - 240 V ~

Mains frequency 50/60 Hz

Charging voltage (output) 7.2 - 18 V=

Rapid charging max. 3 A

Conservation charging current, pulsating (only NiCd, NiHM) approx. 0.06 A

Charging times for LiIon 1.3 Ah/ 2.6 Ah, 80 % approx. 22/ 45 min

LiIon 1.3 Ah/ 2.6 Ah, 100 % approx. 35/ 70 min

Permitted charging temperature range -5 °C to +45 °C

Temperature monitoring via NTC resistor

Battery pack BPS 12 Li BPC 12 Li BPS 15 Li BPC 15 Li BPS 18 Li

Voltage 10.8 V 10,8 V 14.4 V 14,4 V 18 V

Capacity 1.3 Ah 1,5 Ah 2.6 Ah 3,0 Ah 2.6 Ah/ 3,0 Ah

Weight 0.49 kg 0.30 kg 0.58 kg 0.55 kg 0.67 kg

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 131 132

Comments to this Manuals

No comments

Festool PSBC 400 EB CARVEX User Manual Page 16

Comments to this Manuals

Related products and manuals for Power tools Festool PSBC 400 EB CARVEX