Festool Power box User Manual download pdf (Page 20)

EAA

8.3 Connecting the compressed air line



Applies only for ASA mounting and ceiling in-

stallation.



Cut the grey compressed air line to the correct

length.



EW versions:

Guide the air hose through the

housing

[11-1]

onto the hose connector

[11-3]

and close the screw clamp

[11-2]



EW/DW versions:

Slide the grey air hose onto

the hose connector at the maintenance unit in-

let

[7-3]

and close the screw clamp

[7-2]



Secure the compressed air line and the mains

power and control cable to the aluminium pipe

[12-2]

using the three gripper clamp supplied

[12-1]



Insert the end of the blue hose into the connec-

tion

[5-1]

and guide the hose through the open-

ing on the housing.



Once you have attached all the connections in-

side the EAA, mount the rear panel on the EAA.



Push the blue air hose onto the elbow piece

[2-

on the maintenance unit.

8.4 Mounting the hose holder

The hose holder is used to store consumable mate-

rials and hoses. Attach the two hose holders to the

rear panel of the EAA (see Fig.

[13]



Secure the hose holder

[13-4]

by screwing an

Allen screw

[13-2]

with washer

[13-3]

into both

holes using the Allen key

[13-1]

supplied.



Secure the rear panel to the EAA using the

screws supplied.

9 Connecting the dust extractor

A mobile dust extractor or the stationary TURBO

extraction system can be used to extract dust.

9.1 Mobile dust extractor

CT mobile dust extractors, series CT 22, CT 33, CT

44, CT 55



Fit the assembly set (module EAA CT22/33/44/

55: 495756) for the control cable to the CT mo-

bile dust extractor (see assembly instructions).

CT mobile dust extractor series CT 26, CT 36, CT 48



Fit the assembly set (module EAA CT26/36:

496143) to the CT mobile dust extractor (already

fitted on CTM 36/48 LE and CTL 36/48 LE mod-

els).



Plug the control cable into the socket on the ex-

tractor.

SRM mobile extractor and other brands of ex-

tractor

Connecting the control cable is no longer possible.

If the dust extractor has an appliance socket with

automatic switch-on unit, the mains cable on the

EAA must be plugged into this appliance socket so

that the automatic switch-on unit on the dust ex-

tractor functions. However, note the maximum ca-

pacity of the appliance socket. Not all EAA func-

tions can be used. We therefore recommend using

a Festool mobile dust extractor.



Plug the extractor hose into the extractor open-

ing on the dust extractor.



We recommend using rotating adapter D50

DAS-AS to connect the extractor hose to the

dust extractor.



If the EAA is quite far away from the mobile dust

extractor, part of the extractor hose should be

replaced by a plastic pipe or a steel pipe de-

signed for extraction systems (diameter 50

mm). This reduces the air flow resistance in the

extraction line and improves the suction power

at the EAA.

9.2 Stationary extraction system TURBO



Plug the control cableinto the socket on the ex-

traction system.



Plug the extractor hose into the extractor open-

ing on the extraction system (D75).

10 Power supply

Power and compressed air is supplied through the

energy box.

10.1 Power

All EAA versions have three sockets. Socket

[1-3]

connected permanently to the power. The two sock-

ets AUTO 1

[1-9]

and AUTO 2

[1-5]

are live when the

selector switch

[1-4]

is set to the "

AUTO

" position.

If the switch is set to "0" or "MAN", the sockets are

disconnected from the power supply.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 163 164

Festool Power box User Manual Page 20

Comments to this Manuals

Festool Power box User Manual Page 20

Comments to this Manuals

Related products and manuals for Power tools Festool Power box