Festool EHL65 EQ User Manual download pdf (Page 11)

EHL 65 EQ

metal parts of the power tool "live" and could give

the operator an electric shock.

–

Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by your hand or against the

body leaves it unstable and may lead to loss of

control.

–

Festool electric power tools must only be in-

stalled on work tables provided by Festool for

this purpose.

If the tool is installed in another, or

self-made, work table, it can become unstable

and result in serious accidents.

– Check the installation fixture prior to use and do

not use the machine if the fixture does not func-

tion correctly.

–

Wear suitable protection:

such as ear protec-

tion, safety goggles, a dust mask for work which

generates dust, and protective gloves when

working with raw materials and when changing

tools.

5.3 Emission levels

Levels determined in accordance with EN 60745 are

typically:

Vibration emission level a

(vector sum for three di-

rections) and uncertainty K measured in accor-

dance with 60745:

The specified emissions values (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary esti-

mates regarding vibration and noise loads during

operation.

– They represent the primary applications of the

power tool.

Increase possible for other applications, with other

insertion tools or if not maintained adequately. Take

note of idling and downtimes of machine!

6Operation

Always switch the machine off before con-

necting or disconnecting the mains power

cable!

Connecting and detaching the mains power cable

see Fig.

[2]

Switch on: press

[1-7]

Switch off: release

[1-7]

7 Settings

7.1 Electronics

The machine features full-wave electronics with

the following features:

Smooth start-up

The electronically controlled smooth start-up en-

sures that the machine starts up jolt-free.

Constant speed

The motor speed remains constant through elec-

tronic control to ensure a uniform cutting speed

even when under load.

Temperature cut-out

The machine power supply is limited and the speed

reduced if the motor exceeds a certain tempera-

ture. The machine continues operating at reduced

power to allow the ventilator to cool the motor

quickly. The machine starts up again automatically

once the motor has cooled sufficiently.

7.2 Adjusting the planing thickness

Use the rotary knob

[1-4]

Sound pressure level L

= 77 dB(A)

Sound power level L

= 88 dB(A)

Uncertainty K = 3 dB

Wear ear protection.

Vibration emission level (3 direc-

tions):

< 2,5 m/s

Uncertainty K = 1,5 m/s

WARNING

Unauthorised voltage or frequency!

Risk of accident

The mains voltage and the frequency of the pow-

er source must correspond with the specifica-

tions on the machine's name plate.

In North America, only Festool machines with

the voltage specifications 120 V/60 Hz may be

used.

WARNING

Risk of injury, electric shock

Always pull the mains plug out of the socket be-

fore performing any type of work on the ma-

chine!

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 65 66

Comments to this Manuals

No comments

Festool EHL65 EQ User Manual Page 11

Comments to this Manuals

Related products and manuals for Power tools Festool EHL65 EQ