Festool EHL65 EQ User Manual download pdf (Page 13)

EHL 65 EQ

A support foot

[1-10]

is fitted to the end of the plan-

er foot so that the EHL 65 EQ can be set down safe-

ly.When the machine is lifted up, the support foot

automatically swivels over the edge of the planer

foot so that the blade does not touch the surface

when the planer is set down.

8.2 Chamfering

The front planer foot is fitted with a 90° V groove

[1-

11]

for chamfering workpiece edges. The V groove

is 2 mm deep so that 2 mm of the edge is chamfered

when the planing thickness is set to 0.

8.3 Bench mounting

The planer can be operated as a stationary machine

in combination with bench unit SE-EHL (488524).

9 Service and maintenance

Customer service and repair

only

through manufacturer or service

workshops: Please find the nearest

address at:

www.festool.com/Service

Use only original Festool spare parts!

Order No. at:

www.festool.com/Service

The machine is equipped with special carbon

brushes. If they are worn, the power is interrupted

automatically and the machine comes to a stand-

still.

To ensure constant air circulation, always keep the

cooling air openings in the motor housing clean and

free of blockages.

10 Accessories

The order numbers of the accessories and tools can

be found in the Festool catalogue or on the Internet

under "www.festool.com".

10.1 Fitting the rebate depth stop [5]

The rebate depth stop

[5-2]

can be adjusted in in-

finite variables to a setting between 0 to 23 mm. The

marking [5-1] indicates the rebate depth setting.

10.2 Fitting the parallel stop [6]

In order to plane along an edge, the planing width

can be adjusted from 0 to 65 mm by releasing the

clamp

[6-1]

and adjusting the stop.

11 Environment

Do not dispose of the device in house-

hold waste!

Recycle devices, accesso-

ries and packaging. Observe applica-

ble country-specific regulations.

EU only:

European Directive 2002/96/

EC stipulates that used electric power tools must

be collected separately and disposed of at an envi-

ronmentally responsible recycling centre.

Information on REACh:

www.festool.com/reach

12 EU Declaration of Conformity

We declare under sole responsibility that this prod-

uct complies with the following directives and stan-

dards:

2006/42/EG, 2004/108/EG, 2011/65/EU, EN 60745-

1, EN 60745-2-14, EN 55014-1, EN 55014-2, EN

61000-3-2, EN 61000-3-3.

Festool Group GmbH & Co. KG

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Martin Zimmer

Head of Research, Development and Technical

Documentation

15.10.2012

WARNING

Risk of injury, electric shock

Always disconnect the mains plug from the

socket before performing maintenance work on

the machine!

All maintenance and repair work which requires

the motor housing to be opened must only be

carried out by an authorised service workshop.

EKAT

One-handed planer Serial no.

EHL 65 EQ 10005425, 499543,

10008100, 10008101

Year of CE mark: 2012

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Comments to this Manuals

No comments

Festool EHL65 EQ User Manual Page 13

Comments to this Manuals

Related products and manuals for Power tools Festool EHL65 EQ