Festool PSB 300 EQ TRION User Manual Page 14
- Page / 79
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
14
TRION
GB
push base runner to rear position so that the
centring pin
[5-1]
fits in the opening
[5-3]
,
tighten locking screw
[4-1]
.
7.7 Adjusting the pendulum stroke
In order to process different materials with an opti-
mum feed movement the pendulum jigsaws have
an adjustable pendulum stroke. Select the desired
setting with the pendulum stroke switch
[1-5]
:
setting 0 = pendulum stroke off
setting 3 = maximum pendulum stroke
7.8 Adjusting the number of strokes
PSB 300 Q,
PSB 300 EQ
You can regulate the number of strokes steplessly
between 1000 and 2900 min
-1
using the adjusting
wheel
[1-2; 2-3]
. This enables you to optimise the
cutting speed to suit the material.
8 Working with the machine
8.1 Free hand according to the scribe mark
The triangular shape of the splinterguard
[4-3]
shows the cutting line of the saw blade and thus fa-
cilitates cutting to a scribe mark.
8.2 Plunge cutting without pilot drilling
The base runner must be in the front position for
plunge cuts in timber materials (basic setting, see
Figure
[1]
).
Place saw on the front edge of the runner.
Set saw to maximum no. of strokes and pendu-
lum stroke setting 3 and start the plunge cut
into the workpiece (Figure
[6]
).
9 Service and maintenance
Damaged safety devices and components must be
repaired or replaced in a recognised specialist
workshop, unless otherwise indicated in the oper-
ating manual.
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of blockages.
10 Accessories
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
10.1 Festool guide system FS
The use of the Festool guide system FS (Figure
[7]
)facilitates the production of straight and precise
cuts, particularly with material thicknesses up to
20 mm. The jigsaw is hereby placed in a guide stop
[7-1]
order no. 490031) and guided along the guide
rail in this. The guide stop has two adjustable limit
stops
[7-2]
for a setting free from play. Use only
crossed saw-blades when utilising the guide stop.
We recommend Festool saw blade S 75/4 FSG.
10.2 Parallel guide
Use the parallel guide (order no. 490119) to guide
the jigsaw parallel to the workpiece edge. The par-
allel guide can be fitted on both sides of the base
runner:
Slide clamping clip
[8-1]
onto the base runner
from the front,
insert parallel guide
[8-2]
through the clamping
clip from the side to the desired position,
tighten rotary knob
[8-3]
.
Recommended settings of the pendulum
stroke
Hard and soft wood,chip board, wood
fibre board
1 - 3
Wood core plywood, plywood, plastics 1 - 2
Ceramic 0
Aluminium, NF metals 0 - 2
Steel 0 - 1
Recommended number of strokes (adjusting
wheel setting)
Hard and soft wood, wood core plywood,
plywood, chip board
6
Wood fibre boards 4 - 6
Plastics 3 - 6
Ceramic, aluminium, NF metals 3 - 5
Steel 2 - 4
WARNING
Risk of injury
Always secure the workpiece in such a manner
that it cannot move while being machined.
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!
All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
- PS 300 Q 1
- PS 300 EQ 1
- PSB 300 Q 1
- PSB 300 EQ 1
- 1-5 1-31-4 3
- 2-1 2-32-2 3
- 2-8 2-42-52-62-7 3
- 4-1 4-34-2 4
- 3-1 3-33-2 4
- 5Emissionswerte 7
- VORSICHT 7
- 8 Arbeiten mit der Maschine 9
- 9 Wartung und Pflege 9
- 10 Zubehör 10
- 11 Umwelt 10
- 12 EG-Konformitätserklärung 10
- 2Technical data 11
- 3 Intended use 11
- 4Safety instructions 11
- Original operating manual 11
- 1Symbols 11
- 5Emission levels 12
- 6Operation 12
- 7 Settings 13
- 8 Working with the machine 14
- 9 Service and maintenance 14
- 10 Accessories 14
- 11 Environment 15
- 5 Valeurs d'émission 17
- ATTENTION 17
- 6 Mise en service 18
- 7 Réglages 18
- AVERTISSEMENT 18
- 8Travail avec la machine 19
- 9 Entretien et maintenance 20
- 10 Accessoires 20
- 11 Environnement 20
- 1Símbolos 22
- 2Datos técnicos 22
- 3 Uso conforme a lo previsto 22
- 4 Indicaciones de seguridad 22
- 5Emisiones 23
- ATENCIÓN 23
- 8 Trabajo con la máquina 25
- ADVERTENCIA 25
- 9 Mantenimiento y cuidado 26
- 10 Accesorios 26
- 11 Medio ambiente 26
- 1Simboli 28
- 2Dati tecnici 28
- 3 Utilizzo conforme 28
- 4 Avvertenze per la sicurezza 28
- 5Emissioni 29
- ATTENZIONE 29
- 8 Lavorazione con la macchina 31
- 9 Manutenzione e cura 31
- AVVERTENZA 31
- 10 Accessori 32
- 11 Ambiente 32
- Originele gebruiksaanwijzing 33
- 1Symbolen 33
- 2 Technische gegevens 33
- 4 Veiligheidsvoorschriften 33
- 5 Emissiewaarden 34
- VOORZICHTIG 34
- 8Het werken met de machine 36
- 9 Onderhoud en verzorging 36
- WAARSCHUWING 36
- 12 EG-conformiteitsverklaring 37
- Originalbruksanvisning 38
- 1Symboler 38
- 2 Tekniska data 38
- 3 Avsedd användning 38
- 4 Säkerhetsanvisningar 38
- 5Emissionsvärden 39
- 6Driftstart 39
- OBSERVER 39
- 7 Inställningar 40
- 8 Arbeta med maskinen 41
- 9 Underhåll och skötsel 41
- 10 Tillbehör 41
- 11 Miljö 42
- Alkuperäiset käyttöohjeet 43
- 1 Tunnukset 43
- 2 Tekniset tiedot 43
- 3 Määräystenmukainen käyttö 43
- 4Turvaohjeet 43
- 5 Päästöarvot 44
- 6 Käyttöönotto 44
- VAROITUS 44
- 8 Työskentely koneella 46
- 9Huolto ja hoito 46
- 10 Tarvikkeet 46
- 11 Ympäristö 47
- Original brugsanvisning 48
- 2 Tekniske data 48
- 3 Bestemmelsesmæssig brug 48
- 4 Sikkerhedsanvisninger 48
- 5 Emissionsværdier 49
- 6 Ibrugtagning 49
- FORSIGTIG 49
- ADVARSEL 49
- 7 Indstillinger 50
- 8 Arbejde med maskinen 51
- 9 Vedligeholdelse og pleje 51
- 10 Tilbehør 51
- 11 Miljø 52
- 3 Riktig bruk 53
- 4 Sikkerhetsregler 53
- 5 Utslippsverdier 54
- 6 Igangsetting 54
- FORSIKTIG 54
- 7 Innstillinger 55
- 8 Arbeid med maskinen 56
- 9 Vedlikehold og pleie 56
- 12 EU-samsvarserklæring 57
- 5 Valores de emissão 59
- 8Trabalhos com a ferramenta 61
- 9 Manutenção e conservação 61
- 10 Acessórios 62
- 11 Meio ambiente 62
- 5 Уровни шума 64
- Осторожно 64
- 6 Начало работы 65
- 7Настройки 65
- Предупреждение 65
- 11 Опасность для окружающей 68
- 12 Декларация соответствия ЕС 68
- Originální návod k použití 69
- 1Symboly 69
- 2Technické údaje 69
- 3Účel použití 69
- 4 Bezpečnostní pokyny 69
- 5 Hodnoty emisí 70
- 8 Práce s nářadím 72
- 9Údržba aošetřování 72
- 10 Příslušenství 72
- VAROVÁNÍ 72
- 11 Životní prostředí 73
- 12 ES prohlášení o shodě 73
- 5 Parametry emisji 75
- OSTROŻNIE 75
- 6Rozruch 76
- 7Ustawienia 76
- OSTRZEŻENIE 76
- 11 Środowisko 79
Related products and manuals for Power tools Festool PSB 300 EQ TRION
Power tools Festool HL 850 EB User Manual
(62 pages)
(62 pages)
Power tools Festool MFK 700 EQ User Manual
(92 pages)
(92 pages)
Power tools Festool RS 100 CQ User Manual
(46 pages)
(46 pages)
Power tools Festool VAC SYS User Manual
(101 pages)
(101 pages)
Power tools Festool CS 70 E PRECISIO User Manual
(116 pages)
(116 pages)
Power tools Festool CMS-OF User Manual
(100 pages)
(100 pages)
Power tools Festool CMS PS 300 User Manual
(48 pages)
(48 pages)
Power tools Festool TP 220 User Manual
(38 pages)
(38 pages)
Power tools Festool CTL 55 E User Manual
(70 pages)
(70 pages)
Power tools Festool CTM 55 E User Manual
(78 pages)
(78 pages)
© 2020, manymanuals.com. All rights reserved. | 2.370 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals