Festool PLANEX LHS 225 EQ User Manual download pdf (Page 22)

Problem Possible causes Remedy

Sanding grooves on

the surface

Hard sanding pad set down on the

surface at an angle.

Use sanding pad IP with interface pad.

Sanding pad is too hard or abrasive

grit too coarse for very soft repair

compound.

Use sanding pad IP with interface pad.

Select a ﬁ ner abrasive grit (Brilliant 2 abra-

sive with grit up to P 320).

PLANEX switches

off during work – red

LED on the head of

the machine ﬂ ashes

Dust ﬁ lter on PLANEX clogged Clean the dust ﬁ lter on the PLANEX.

Excessive pressure -> machine acti-

vates overheating protection

Allow the machine to cool and apply less

pressure; in extreme cases, switch on the

external extraction system and set the extrac-

tion control to setting 6.

PLANEX does not

function

Electrical plug is not connected cor-

rectly.

Check that the electrical plug is inserted

properly.

If other problems other than those listed occur, please contact your Festool service workshop or your

local specialist dealer.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 125 126

No comments

Festool PLANEX LHS 225 EQ User Manual Page 22