Festool Jigsaw PS 300 EQ User Manual download pdf (Page 4)

Class II Construction

spm strokes per minute

Functional description

1.1

PS 300 EQ

1.2

1.6

1.7

1.5 1.4 1.3

1.1

PSB 300 EQ

1.2

1.6

1.8

1.7

1.5 1.4 1.3

1.1 On/Off switch

1.2 Speed controller

1.3 Extractor connection piece

1.4 Allen key

1.5 Pendulum stroke switch

1.6 Chip guard

1.7 Chuck lever

1.8 Locking button (only PSB 300 EQ)

Use for intended purpose

These pendulum jigsaws are designed for sawing

wood and wood-like materials. Plastics, steels,

aluminum, non-ferrous metals and ceramic tiles

can also be cut using special sawblades as recom-

mended in the Festool sales documents for the

speciﬁ c materials.

The user shall be liable for damages

and accidents resulting from incorrect use.

Electrical connec-

tion and operation

The mains (supply) voltage must correspond to

the voltage on the rating plate!

See the following Fig. for connecting or discon-

necting the power cord of the tool.

Always switch the machine off before

connecting or disconnecting the power cable!

The PS 300 EQ has a slide switch [1.1] to switch

the tool on and off (I = ON, 0 = OFF).

The PSB 300 EQ has a pushbutton switch [1.1]

to switch the tool on and off. This can be locked

with the locking button [1.8] for continuous

operation. Press the pushbutton switch again to

release the lock.

Extension cord

If an extension power cord is required, it must

have sufﬁ cient cross-section to prevent an exces-

sive drop in voltage or overheating. An excessive

drop in voltage reduces the output and can lead

to failure of the motor. The table below shows you

the correct cord diameter as a function of the cord

length for the PS/PSB 300 EQ.

Total Extension Cord

Lenght (feed)

25 50 100 150

Cord size (AWG) 18 16 12 10

Use only U.L. and CSA listed extension cords.

Never use two extension cords together. Instead,

use one longer one.

Note: The lower the A.W.G. number, the thicker

the cord.

Tool settings

Always disconnect the plug from the

power supply before making any adjustments to

the tool or installing or removing any accessory!

Electronic control

The PS 300 EQ and PSB 300 EQ have control

electronics which enable stepless adjustment of

the stroke rate between 1000 and 2900 strokes

per minute. The desired stroke rate is set with the

speed controller [3.1, 3.2]:

PS 300 EQ PS 300 EQ

3.1 3.2

Recommended stroke rate (speed controller

setting):

Hard and soft wood, wood core plywood: 6

1 2 3 4 5 6 7 8 9 ... 23 24

Comments to this Manuals

No comments

Festool Jigsaw PS 300 EQ User Manual Page 4

Comments to this Manuals

Related products and manuals for Power tools Festool Jigsaw PS 300 EQ